Interlocking –Panel
The Euroclad Interlocking Panel system is a highly adaptable wall cladding solution employing a cassette type panel. The recessed seams range from 5mm to 20mm in width. Installation proceeds from top to bottom, concealing all fixings along the way, with the flexibility of vertical or horizontal panel placement. This system ensures a swift and straightforward installation across large wall areas, minimizing installation time. Panels are secured using hidden fasteners onto top-hat sections perpendicular to the panel face. Leveraging our advanced manufacturing equipment, the pan widths are precisely customizable to the millimeter, granting complete design control.
-
Features
- 01 Fast easy snap together panels
- 02 Modern cassette type panel without the need for silicone joints.
- 03 Can be installed by any roofing contractor
- 04 Available from 3degs roof pitch through to vertical
- 05 Concealed fasteners
-
Application
- Facades
- Soffits
- Wall Cladding
-
Installation
- 20 mm continuous air gap must be beneath the panels for ventilation.
- Proctor breathable roofshield fixed to substrate
- Euroclad Interlocking panels are installed on a minimum 20mm ventilation batten
- Concealed fasteners attached directly into batten behind.
- Push together seams and level off
-
Specifications
Metal cladding/roofing and especially lengthy flat-span sheet-metal panels often will exhibit waviness, commonly referred to as “oil-canning.” The degree of oil-canning and the appearance of the panels will vary depending on factors such as the length and colour of the panels, alloy, gauge, substrate condition and exposure to sunlight. Oil-canning pertains to aesthetics and not the performance of the panels and is not controlled by the contractor. The type of metal roofing panels specified can affect the degree of oil-canning. Euroclad is not responsible for oil-canning or aesthetics. Oil-canning shall not be grounds to withhold payment or reject panels of the type specified. For more information please contact Euroclad.
-
Materials
Double lock standing seam roofing is available in the following materials:
Copper
Aluminium
Colorbond
VM Zinc
Corten
Zalmag
-
Downloads
Single Lock –Standing Seam
The single lock standing seam system is a traditional flat-tray cladding system with a raised 25mm high seam. All fixings are concealed using stainless steel clips that allow for expansion and contraction in the cladding panels. The pan widths are customisable using our state of the art manufacturing equipment to the millimetre allowing total control over your designs. It reflects the individual concerns for both light and shadow and produces designs that have a modern yet historical perspective.
The single Lock Standing Seam system can be installed vertically, horizontally or diagonally in wall cladding applications. Panels can be curved both horizontally and vertically. Seams can also be mitred into roofing pans for a seamless, flashing-less design. Many modern building designs now incorporate the single lock standing seam system.
-
Features
- 01 Versatile roofing system with a traditional look
- 02 Easy to install
- 03 Can be curved in vertical & horizontal application
- 04 Vertical, horizontal and diagonal installation
- 05 Concealed clips and fasteners
-
Application
- Facades
- Wall Cladding
- Roofing
- Long Surfaces
- Structures located in regions of harsh climates
-
Installation
- 20mm continuous air gap must be beneath the plywood substrate for ventilation.
- Proctor breathable wall wrap fixed to outer plywood substrate
- Single Lock Standing Seam cladding is installed on a minimum 15mm plywood substrate (‘other’ substrates are available for buildings with strict fire codes)
- Concealed clips and fasteners attached directly into plywood substrate.
- For roofing applications or cladding areas that require high wind loadings the 25mm seam is closed twice for added strength and increased water ingress.
-
Specifications
Metal cladding/roofing and especially lengthy flat-span sheet-metal panels often will exhibit waviness, commonly referred to as “oil-canning.” The degree of oil-canning and the appearance of the panels will vary depending on factors such as the length and colour of the panels, alloy, gauge, substrate condition and exposure to sunlight. Oil-canning pertains to aesthetics and not the performance of the panels and is not controlled by the contractor. The type of metal roofing panels specified can affect the degree of oil-canning. Euroclad is not responsible for oil-canning or aesthetics. Oil-canning shall not be grounds to withhold payment or reject panels of the type specified. For more information please contact Euroclad.
-
Materials
Double lock standing seam roofing is available in the following materials
Copper
Aluminium
Colorbond
VM Zinc
Corten
Zalmag
-
Downloads
Flat-Lock –Panel
The Flat-lock Panel system is as the name suggests, the flattest cladding system offered by Euroclad. The panels interlock together using a recessed hook/fold technique. The panels are an extremely versatile wall cladding solution offering great flexibility especially if needing to curve. The panels can be installed vertically, horizontally or diagonally. The hook folds are adjustable and can vary from 0mm to 20mm wide each. Panels are fixed using concealed fasteners directly into plywood substrate using sliding clips. The pan widths are customisable using our state of the art manufacturing equipment to the millimetre allowing total control over your designs.
-
Features
- 01 Flat modern design
- 02 Can be formed in rectangle, square or diamond patterns
- 03 Concealed fasteners
- 04 Available in vertical or Horizontal
- 05 Interlocking welt on all four sides
-
Application
- Facades
- Soffits & Wall Cladding
-
Installation
- 20 mm continuous air gap must be beneath the plywood substrate for ventilation.
- Proctor breathable wall wrap fixed to substrate
- Flat-lock panels are installed on a minimum 15mm plywood substrate
- Concealed fasteners attached directly into plywood.
- hook together seams and level off
-
Specifications
Metal cladding/roofing and especially lengthy flat-span sheet-metal panels often will exhibit waviness, commonly referred to as “oil-canning.” The degree of oil-canning and the appearance of the panels will vary depending on factors such as the length and colour of the panels, alloy, gauge, substrate condition and exposure to sunlight. Oil-canning pertains to aesthetics and not the performance of the panels and is not controlled by the contractor. The type of metal roofing panels specified can affect the degree of oil-canning. Euroclad is not responsible for oil-canning or aesthetics. Oil-canning shall not be grounds to withhold payment or reject panels of the type specified. For more information please contact Euroclad.
-
Materials
Double lock standing seam roofing is available in the following materials
Copper
Aluminium
Colorbond
VM Zinc
Corten
Zalmag
-
Downloads
Millennium –Tiles
Millennium Tiles are a unique premium stainless steel tile that will offer your façade or roof what no other material can do ….. Colour. Millennium Tiles are prismatically coloured stainless steel which means they reflect different colours and light depending on viewing angle and sunlight. In other words, when you walk past a Millennium Tiles project the tiles magically change colour offering a unique appearance no other material can match.
Beautiful maintenance free metal tiles are available in either natural or prismatic stainless steel versions. The colour will not fade, crack, peel or be affected by UV.
-
Features
- 01 Beautiful changing colour design
- 02 Easy to install
- 03 Can be used for roofing (15 degs & above) or cladding applications
- 04 Excellent wind resistance
- 05 Lightweight interlocking tile design
- 06 Vertical, horizontal and diagonal installation
- 07 Concealed clips and fasteners
- 08 Available in flat or cupped tiles for added appearance
-
Application
- Facades
- Soffits
- Wall Cladding
- Roofing
-
Installation
- 20mm continuous air gap must be beneath the plywood substrate for ventilation.
- Proctor breathable wall wrap fixed to outer plywood substrate
- Millennium Tiles are installed on a minimum 15mm plywood substrate (‘other’ substrates are available for buildings with strict fire codes)
- Interlocking tile attached directly into plywood substrate.
-
Materials
Double lock standing seam roofing is available in the following materials
Copper
Aluminium
Colorbond
VM Zinc
Corten
Zalmag
-
Downloads
–Nail-Strip
The 25mm nail-strip system is a modern take on the traditional standing seam flat-tray system. Panels feature a unique push and snap-lock seam that greatly reduces installation time and the need for traditional seam closing techniques. Panels are xed using concealed fasteners directly into the slotted tab on the side of the seam. No clips are required for nail-strip roofing and cladding. The pan widths are customisable using our state of the art manufacturing equipment to the millimetre allowing total control over your designs. It reflects the individual concerns for both light and shadow and produces designs that have a modern yet historical perspective.
-
Features
- 01 Fast easy snap together seams
- 02 Easy to install without the need for traditional seaming equipment
- 03 Available from 3degs roof pitch through to vertical
- 04 Looks very similar to Standing Seam
- 05 Concealed clips and fasteners
- 06 Can be installed by any roofing contractor
-
Application
- Facades
- Wall Cladding
- Roofing
-
Installation
- 20 – 40mm continuous air gap must be beneath the plywood substrate for ventilation.
- Proctor breathable roofshield fixed to outer plywood substrate
- Nail-strip roofing is installed on a minimum 18mm plywood (15mm cladding) substrate (‘other’ substrates are available for buildings with strict fire codes)
- Concealed fasteners attached directly into plywood substrate.
- Push and click seams together for a snap tight seam.
-
Specifications
Metal cladding/roofing and especially lengthy flat-span sheet-metal panels often will exhibit waviness, commonly referred to as “oil-canning.” The degree of oil-canning and the appearance of the panels will vary depending on factors such as the length and colour of the panels, alloy, gauge, substrate condition and exposure to sunlight. Oil-canning pertains to aesthetics and not the performance of the panels and is not controlled by the contractor. The type of metal roofing panels specified can affect the degree of oil-canning. Euroclad is not responsible for oil-canning or aesthetics. Oil-canning shall not be grounds to withhold payment or reject panels of the type specified. For more information please contact Euroclad.
-
Materials
Double lock standing seam roofing is available in the following materials
Copper
Aluminium
Colorbond
VM Zinc
Corten
Zalmag
-
Downloads
–Snap-Lock
The 38mm Snap-Lock system is a modern take on the traditional standing seam flat-tray system. Panels feature a unique push and snap-lock seam that greatly reduces installation time and the need for traditional seam closing techniques. Panels are fixed using concealed fasteners directly into stainless steel clips on the side of the seam. The pan widths are customizable using our state of the art manufacturing equipment to the millimetre allowing total control over your designs. It reflects the individual concerns for both light and shadow and produces designs that have a modern yet historical perspective.
-
Features
- 01 Fast easy snap together seams
- 02 Easy to install without the need for traditional seaming equipment
- 03 Available from 3degs roof pitch through to vertical
- 04 Looks very similar to Standing Seam
- 05 Concealed fasteners
- 06 Can be installed by any roofing contractor
-
Application
- Facades
- Wall Cladding
- Roofing.
-
Installation
- 20 – 40mm continuous air gap must be beneath the plywood substrate for ventilation.
- Proctor breathable roofshield fixed to outer plywood substrate
- Snap-Lock roofing is installed on a minimum 18mm plywood (15mm cladding) substrate (‘other’ substrates are available for buildings with strict fire codes)
- Concealed fasteners attached directly into plywood substrate.
- Push and click seams together for a snap tight seam.
-
Specifications
Metal cladding/roofing and especially lengthy flat-span sheet-metal panels often will exhibit waviness, commonly referred to as “oil-canning.” The degree of oil-canning and the appearance of the panels will vary depending on factors such as the length and colour of the panels, alloy, gauge, substrate condition and exposure to sunlight. Oil-canning pertains to aesthetics and not the performance of the panels and is not controlled by the contractor. The type of metal roofing panels specified can affect the degree of oil-canning. Euroclad is not responsible for oil-canning or aesthetics. Oil-canning shall not be grounds to withhold payment or reject panels of the type specified. For more information please contact Euroclad.
-
Materials
Double lock standing seam roofing is available in the following materials
Copper
Aluminium
Colorbond
VM Zinc
Corten
Zalmag
-
Downloads