PANEL TYPE

Overview

The double lock standing seam system is a traditional fat-tray roofing system with a raised 25mm high seam. All fixings are concealed using stainless steel clips that allow for expansion and contraction in the roof panels. The pan widths are customisable using our state of the art manufacturing equipment to the millimetre allowing total control over your designs.
It reflects the individual concerns for both light and shadow and produces designs that have a modern yet historical perspective.
The Double Lock Standing Seam is a traditional system that has been used historically throughout Europe and America for many years. Seams can also be mitred into cladding pans for a seamless, ashing- less design. Many modern building designs now incorporate the double lock standing seam system.


Features

Zinc roofingVersatile roofing system with a traditional look
Easy to install
Available from 3degs roof pitch through to vertical
Can be curved up to 1.5m diameter
Zinc roofingConcealed clips and fasteners

Materials
Copper, Corten, VM Zinc, Zalmag, Aluminium, Colorbond


Applications
Roofing and Cyclonic areas


Installation
– 40mm continuous air gap must be beneath the plywood substate for ventilation
– Proctor breathable roofshield fixed to outer plywood substate
– Double Locked Standing Seam roofing is installed on a minimum 18mm plywood substate (‘other’ substates are available for building with strict fire codes)
– Concealed clips and fasteners attached directly into plywood substate.


Specifications
** Metal cladding/roofing and especially lengthy flat-span sheet-metal panels often will exhibit waviness, commonly referred to as “oil-canning.” The degree of oil-canning and the appearance of the panels will vary depending on factors such as the length and colour of the panels, alloy, gauge, substrate condition and exposure to sunlight. Oil-canning pertains to aesthetics and not the performance of the panels and is not controlled by the contractor. The type of metal roofing panels specified can affect the degree of oil-canning. Euroclad is not responsible for oil-canning or aesthetics. Oil-canning shall not be grounds to withhold payment or reject panels of the type specified. For more information please contact Euroclad.


Download
Double Locked Standing Seam Roofing
Double Locked Standing Seam Roofing Brochure

Overview

The 25mm nail-strip system is a modern take on the traditional standing seam flat-tray system. Panels feature a unique push and snap-lock seam that greatly reduces installation time and the need for traditional seam closing techniques. Panels are xed using concealed fasteners directly into the slotted tab on the side of the seam. No clips are required for nail-strip roofing and cladding. The pan widths are customisable using our state of the art manufacturing equipment to the millimetre allowing total control over your designs. It reflects the individual concerns for both light and shadow and produces designs that have a modern yet historical perspective.


Features

 Zinc roofing systemFast easy snap together seams
Zinc Roofing australiaEasy to install without the need for traditional seaming equipment
 Zinc roofing systemAvailable from 3degs roof pitch through to vertical
Zinc Roofing australiaLooks very similar to Standing Seam
Zinc roofing queenslandConcealed clips and fasteners
 Zinc roofing systemCan be installed by any roofing contractor

Materials

Copper, Corten, Zalmag, Aluminium, Colorbond


Download
25mm Nail Strip Roofing Details

Overview

The 38mm Snap-Lock system is a modern take on the traditional standing seam flat-tray system. Panels feature a unique push and snap-lock seam that greatly reduces installation time and the need for traditional seam closing techniques. Panels are fixed using concealed fasteners directly into stainless steel clips on the side of the seam. The pan widths are customisable using our state of the art manufacturing equipment to the millimetre allowing total control over your designs. It reflects the individual concerns for both light and shadow and produces designs that have a modern yet historical perspective.


Features

Zinc roofing queenslandFast easy snap together seams
 Zinc Roofing byron bayEasy to install without the need for traditional seaming equipment
Zinc roofing queenslandAvailable from 3degs roof pitch through to vertical
 Zinc Roofing byron bayLooks very similar to Standing Seam
Zinc roofing queenslandConcealed fasteners
 Zinc Roofing byron bayCan be installed by any roofing contractor

Materials
Copper, Corten, Zalmag, Aluminium, Colorbond


Download
38mm Snap-lock Roofing Details
38mm Snap-lock Roofing Details Brochure

Overview

The batten cap system is the most traditional at-tray roo ng system with a raised 25mm high seam and 50mm wide batten cap for chunkier wider looking seams. A traditionally old technique used for hundreds of years throughout Europe now modernized for more contemporary designs. All fixings are concealed using galvanized steel clips that allow for expansion and contraction in the roof panels. The pan widths are customisable using our state of the art manufacturing equipment to the millimetre allowing total control over your designs. It re ects the individual concerns for both light and shadow and produces designs that have a modern yet historical perspective.
The Batten Cap system is often sought after by architects and designers alike for its character and shadow effects. Many modern building designs now incorporate the batten cap system.


Features

 Zinc Roofing byron bayTraditional wide 50mm batten cap for enhanced shadow effects
Zinc Roofing australiaEasy to install
Zinc Roofing australiaCan be used horizontally or vertically on walls
 Zinc Roofing byron bayAvailable from 3degs roof pitch through to vertical
Zinc Roofing australiaConcealed clips and fasteners

Materials
Copper, Corten, VM Zinc, Zalmag, Aluminium, Colorbond


Download
Batten Cap Roofing

OUR HIGHLY TRUSTED PARTNERS

Standing Seam Zinc Roofing
wall cladding Byron Bay
aluminium cladding
wall cladding
aluminium roofing Byron Bay