Est. 2008
Est. 2008
Nail-strip is the modern simplification of standing seam: a 25 mm push-lock seam with fasteners driven through a slotted tab in the panel itself — no separate clips at all. The slot lets the metal move thermally while the seam snaps closed over every fixing.
It's the system we reach for when the budget wants snap-lock speed with an even leaner build-up. Pan widths remain fully custom, and the finished roof or wall is indistinguishable from clipped systems at a glance.
Slight waviness ('oil canning') is an inherent visual characteristic of all flat-pan architectural metal, not a defect. We minimise it through panel-width selection, substrate preparation and tension-levelled coil — talk to us about matte finishes and narrower pans for critical elevations.
The fastener sits in an elongated slot, so the pan expands and contracts along the slot rather than stressing the fixing — the same principle as clips, built into the panel.
Yes — both. Every panel is roll-formed and folded in our Gold Coast workshop, and installation is carried out by our own trained teams, not subcontracted. One point of responsibility from shop drawing to final flashing, backed by QBCC (1283171) and NSW (276164c) licences.