Batten Cap System | Batten Cap Roofing Australia | Batten Cap Metal Roofing | Standing Seam Flat-Tray System

Batten Cap

Overview

The batten cap system is the most traditional flat-tray roofing system with a raised 25mm high seam and 50mm wide batten cap for chunkier wider looking seams. A traditionally old technique used for hundreds of years throughout Europe now modernized for more contemporary designs. All fixings are concealed using galvanized steel clips that allow for expansion and contraction in the roof panels.

The pan widths are customizable using our state of the art manufacturing equipment to the millimetre allowing total control over your designs. It reflects the individual concerns for both light and shadow and produces designs that have a modern yet historical perspective.

The Batten Cap system is often sought after by architects and designers alike for its character and shadow effects. Many modern building designs now incorporate the batten cap system.

Applications

– Facades, wall cladding, roofing, long surfaces.

Features
batten cap system Traditional wide 50mm batten cap for enhanced shadow effects
 Batten cap Roofing Solution Easy to install
batten cap system Can be used horizontally or vertically on walls
 Batten cap Roofing Solution Available from 3degs roof pitch through to vertical
batten cap system Concealed clips and fasteners
Installation

– 40mm continuous air gap must be beneath the plywood substrate for ventilation.
– Proctor breathable roofshield fixed to outer plywood substrate
– Batten Cap roofing is installed on a minimum 18mm plywood substrate (‘other’ substrates are available for buildings with strict fire codes)
– Concealed clips and fasteners attached directly into plywood substrate.

Specifications

** Metal cladding/roofing and especially lengthy flat-span sheet-metal panels often will exhibit waviness, commonly referred to as “oil-canning.” The degree of oil-canning and the appearance of the panels will vary depending on factors such as the length and colour of the panels, alloy, gauge, substrate condition and exposure to sunlight. Oil-canning pertains to aesthetics and not the performance of the panels and is not controlled by the contractor.  The type of metal roofing panels specified can affect the degree of oil-canning. Euroclad is not responsible for oil-canning or aesthetics. Oil-canning shall not be grounds to withhold payment or reject panels of the type specified. For more information please contact Euroclad.

Materials

Double lock standing seam roofing is available in the following materials

 Batten cap Roofing Solution

 

COPPER

batten cap system

VM ZINC
 Batten cap Roofing Solution

 

ALUMINIUM

batten cap system

CORTEN
 Batten cap Roofing Solution

 

COLORBOND

batten cap system

ZALMAG

Specifications

Gallery

OUR HIGHLY TRUSTED PARTNERS

Standing Seam Zinc Roofing
wall cladding Byron Bay
aluminium cladding
wall cladding
aluminium roofing Byron Bay